Concrete & commercial
Concrete and Paver Sealing in Dallas, TX
Sealing is the step that keeps a clean driveway or patio clean. Once the concrete is washed and fully dry, a sealer soaks into the surface and makes it much harder for oil, rust, red wine or sprinkler water to sink in. Most of our sealing is done with a clear penetrating sealer that does not change the look or make the surface slippery.
Ballpark prices
Sealing typically runs $1 to $2 per sq ft on top of the cleaning, so a two-car driveway of about 600 sq ft adds roughly $600 to $1,200.
Ballpark figures for Dallas-area properties, so you know roughly what to expect. We confirm the exact price, from a visit or your photos, before any work starts. Prices are before Texas sales tax.
How we do it
The concrete or pavers are cleaned first, stains treated, and the surface left to dry, usually a day. The sealer is then sprayed or rolled on in even coats, avoiding puddles, and kept off nearby walls and plants. Foot traffic is usually fine after a few hours and cars after about a day.
Penetrating or film-forming?
- Penetrating sealers (silane and siloxane types) soak in and leave no film. The concrete looks the same, stays grippy, and typically lasts several years.
- Film-forming sealers (acrylics) sit on top, add a sheen or a wet look, and are popular on pavers and stamped concrete. They need recoating more often and can be slick when wet.
Dallas weather and sealer
Sealer needs a dry surface and no rain for about a day. In the Dallas summer, we apply it early in the day, because on a slab in full sun it can flash-dry and look blotchy.
Want a price for concrete sealing? Call or send photos and we will get back to you with a quote.
Call for a free quote(972) 846-8122Straight answers
Common questions
How long does concrete sealer last?
Penetrating sealers typically last several years on a driveway; acrylic film sealers on pavers usually need a fresh coat every two to three years.
Will sealing make my driveway slippery?
A penetrating sealer does not change the grip. Glossy film sealers can be slicker when wet, so on pool decks and steps we add a non-slip additive or use a penetrating product.
Can new concrete be sealed?
Yes, once it has cured, usually about a month after it is poured. Check with your concrete contractor first.
Other services
- House WashingSoft wash for brick, siding, stucco and trim
- Driveway CleaningConcrete driveways, walks and curbs
- Roof CleaningBlack streaks off shingles, no high pressure
- Patio and Pool Deck CleaningConcrete, pavers, flagstone and pool decks
- Fence CleaningGray cedar and pine brought back to color
- Deck CleaningWood and composite decks, ready for stain
- Gutter CleaningClean-outs and tiger-stripe removal
- Concrete SealingSealer for driveways, patios and pavers
- Rust Stain RemovalOrange fertilizer and sprinkler stains
- Commercial Pressure WashingStorefronts, sidewalks, lots and dumpster pads
- Graffiti RemovalPaint and marker off brick, block and metal
Service area
Concrete Sealing across Dallas and nearby cities
- Concrete Sealing in Preston Hollow
- Concrete Sealing in Bluffview
- Concrete Sealing in North Dallas
- Concrete Sealing in Lake Highlands
- Concrete Sealing in Lakewood
- Concrete Sealing in Oak Cliff
- Concrete Sealing in Farmers Branch
- Concrete Sealing in Addison
- Concrete Sealing in University Park
- Concrete Sealing in Highland Park
- Concrete Sealing in Carrollton
- Concrete Sealing in Irving
- Concrete Sealing in Coppell
- Concrete Sealing in Richardson
- Concrete Sealing in Plano
- Concrete Sealing in Garland
- Concrete Sealing in Frisco
- Concrete Sealing in McKinney
Also covered: Grand Prairie, Mesquite, Lewisville, Flower Mound, Rowlett, Duncanville, Cedar Hill, Sachse.